I nearly used “primer” in the title, but no need to begin with a bad pun
Where can I find a reliable guide to the basics for low volume home reloading? We live in a very large 19th century Victorian frame house with 10’ ceilings, and fire risk is a concern as it is, without adding a cache of powder and primers to that worry. I do have a separate 12’ x 18’ shed with a gambrel roofed loft that has 7-1/2’ of headroom in the center. I have just insulated that roof, cleaned a lot of junk out of there and made considerable room. My concern with that as a reloading location is that there is no heat or AC and I don’t know what are the acceptable range of storage temperatures and humidity levels for those components. Thanks.
Several good YouTube channels that have reloading as main subject or cover in good detail.
One that mmediately come to mind is “Ultimate Reloader”.
76Highboy use to have several good videos on the Hornady Lock N’ Load press. They are several years old now abd his xhannel has shufted it’s focus to weight lifting.
Look around YouTube. Find someone that you like that preferably is using same press you have.
Hornady Book is good source as well. Has lots of work up loads in it.
Honestly, it’s best to watch a few videos to get an idea on what to do and not to do. Then start with a simple, proven load and just load up a few rounds.
Every new reloader needs to have at least one reloading manual. Lyman’s and Hornady are pretty great.
Get hard copies, the batteries never run out.
The ABC’s of Reloading is an excellent book to read to help get your bearings.
In my 14 years of reloading and talking with hundreds of other reloaders, nobody has burned down their house with reloading supplies.
Follow basic safety rules and reloading is no more dangerous than cooking dinner in your kitchen. Statistically, it is less dangerous than frying chicken.
My setup is in the basement boiler room. Never had a problem in 40 years…be smart lads