# WTS: Inline Fabrications Quick Change Press Mounting System

**URL:** <https://njgunforums.net/t/wts-inline-fabrications-quick-change-press-mounting-system/5177>\
**Category:** Closed Listing Archive\
**Created:** [October 11, 2026, 7:00pm UTC](https://njgunforums.net/t/wts-inline-fabrications-quick-change-press-mounting-system/5177 "2026-10-11T19:00:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JonF1](https://njgunforums.net/letter_avatar_proxy/v4/letter/j/e8c25b/32.png) [@JonF1](https://njgunforums.net/u/JonF1)\
**Post date:** [October 11, 2026, 7:00pm UTC](https://njgunforums.net/t/wts-inline-fabrications-quick-change-press-mounting-system/5177/1 "2026-10-11T19:00:16Z")

</div>

I have an assortment of inline Fabrications quick change press mount plates and receivers. Some of these are used and some of them are new.

One flush mount workbench receiver Master base plate, used.  
One Single storage dock for top plate, new.  
One quick change top plate pre-drilled for single stage presses, used.  
Two quick change top plate blanks for any equipment, new.

$110 For everything picked up in Jackson near six flags.

 ![PXL_20261011_154931038](https://njgunforums.net/uploads/default/original/2X/c/c180e2fe72736cf253c7bb6e96bffa01cda59ff6.jpeg)

---

<div class="post-metadata">

**Author:** ![JonF1](https://njgunforums.net/letter_avatar_proxy/v4/letter/j/e8c25b/32.png) [@JonF1](https://njgunforums.net/u/JonF1)\
**Post date:** [October 13, 2026, 12:18pm UTC](https://njgunforums.net/t/wts-inline-fabrications-quick-change-press-mounting-system/5177/2 "2026-10-13T12:18:36Z")

</div>

Sold

---

<div class="post-metadata">

**Author:** ![NJGF-Admin](https://njgunforums.net/user_avatar/njgunforums.net/njgf-admin/32/139_2.png) [@NJGF-Admin](https://njgunforums.net/u/NJGF-Admin)\
**Post date:** [October 13, 2026, 12:21pm UTC](https://njgunforums.net/t/wts-inline-fabrications-quick-change-press-mounting-system/5177/3 "2026-10-13T12:21:33Z")

</div>